logo


         En | Np

Reference Rate

DDC have to make cost estimate for construction of trail bridges based on district rates of materials and labors. In case of steel parts and galvanization, raw materials are not available at districts and steel parts are not manufactured at districts but at industrial centers. Therefore, the rates of raw materials for steel parts and galvanization should be uniform in all districts. The extra cost due to remoteness of the districts or bridge sites is covered by the transportation cost and is different item.

For this purpose, quotations were collected from different Rolling Mills, Suppliers and Traders for the following materials and accordingly rates are established as below." 
 

1. Structural Steel
SN Items Unit  Rate (NRs.) / Kg            
1 Angle ISA 40X40X3 Kg 76.88
2 Angle ISA 40X40X5 Kg 75.07
3 Angle ISA 45X45X3 Kg 83.00
4 Angle ISA 50X50X3 Kg 83.00
5 Angle ISA 50X50X5 Kg 75.07
6 Angle ISA 50X50X6 Kg 74.61
7 Angle ISA 60X60X5 Kg 85.00
8 Angle ISA 65X65X5 Kg 77.88
9 Angle ISA 65X65X6 Kg 77.88
10 Angle ISA 75X75X6 Kg 79.55
11 Angle ISA 80X80X8 Kg 79.65
12 Angle ISA 90X90X8 Kg 78.00
13 Flat 25/3 Kg 82.86
14 Plates 3-10mm Kg 71.01
Weighted Average Ex-Factory Rate 76.00
Transportation from Rolling Mill to Fabricator                                          2.00
Rate 78.00

 

2. Reiforcemnet Bars
SN  Items Unit                 Rate (NRs.) / K              
1 Reinforcing Bar dia. 8 MM Kg 79.02
2 Reinforcing Bar dia. 10 MM                                           Kg 79.66
3 Reinforcing Bar dia. 12 MM Kg 79.66
4 Reinforcing Bar dia. 16 MM Kg 79.66
5 Reinforcing Bar dia. 20 MM Kg 75.00
6 Reinforcing Bar dia. 25 MM Kg 75.94
7 Reinforcing Bar dia. 28 MM Kg 77.82
8 Reinforcing Bar dia. 32 MM Kg 78.27
Average Rate 78.00
Rate 78.00

 

3. GI Wire
SN  Items Unit                Rate (NRs.) / Kg              
1 GI Wire - 10 SWG Heavy Coated                                 Kg 90.27
Average Rate 90.00
Rate 90.00

 

4. Hex Nuts, Bolts and Washers
4.1 Hex Nuts, Bolts and Washers of Grade 4.6
SN 
Items Unit                 Rate (NRs.) / Kg            
1
Hex Bolt - Hot Dip Galvanized :    M 12X70                Kg 180.00
2
Hex Nut - Hot Dip Galvanized :      M 12 IS Kg 210.00
3
Hex Bolt - Hot Dip Galvanized :    M 16X50 Kg 180.00
4
Hex Nut - Hot Dip Galvanized :      M 16 IS Kg 210.00
Average Rate 195.00
Rate 195.00

 

4.2 Hex Nuts, Bolts and Washers of Grade 8.8
SN 
Items Unit                 Rate (NRs.) / Kg            
1
Friction Grip Bolt, Nut & Washer  M 12X40                 Kg 300.00
2
Friction Grip Bolt, Nut & Washer  M 16X50 Kg 300.00
Average Rate 300.00
Rate 300.00

 

5. G.I. Pipe of Medium Class
SN 
Items                                                                                Unit                  Rate (NRs.) / Meter           
1
40 MM Dia.                                                     Meter 323.01
2
50 MM Dia. Meter 443.36

 

6. Zinc and Chemical for Hot Dip Galvanization
SN 
Items Unit                    Rate (NRs.) / Kg
1
Zinc ( minimum 98.50% purity) Kg 375.00
2

Pre-mix of Zinc Ammonium Chloride

(ZnCl2. 3NH4Cl) : 45% of Zinc Chloride

(ZnCl2) + 55% of Ammonium Chloride (NH4Cl)    

Kg         94.00
3
Hydrochloric Acid Litre 24.00

 

7. Cement
SN 
Items Unit                    Rate (NRs.) / 50 Kg
1
Ex-Factory Rate  Per Bag 725.00

 

Above average rates are based on quotations provided by following Rolling Mills, Suppliers and Traders:                                              
M/s. SIDDHARTHA STEEL
M/s. Steel Wood
M/s. Rajesh Hardware
M/s. Inter-Tech Pvt. Ltd.
M/s. Bhagawati Steel Industries Pvt. Ltd.

 

*As per " Nepal Rajpatra " date 9th Jesth 2068 B. S, the minimum wages of industrial institution has been established as per below
SN
Labour Minimum monthly wage (NRs.) " Mahangi Bhatta " (NRs.) Total (NRs.) Perday (NRs.)
1
Unskilled 8455.00 4995.00 13450.00 517.00*
2
Skilled       547.00**
** Skilled labour rate is based on historical increment over unskilled labour rate.

 

Updated on : 27th September, 2018